Cap Torque Tester 0-50.00kgf-cm/500 Ncm Capacity – IC-CAP-DTXS-40

The CAP-DTXS-40 is an easy-to-use, high-precision cap torque tester that features a large electroluminescent display that clearly indicates the real-time and peak torque. Color-coded LED indicators alert the user to Go/NoGo conditions. Orange lights indicate a value less than low setpoint, green lights between high and low, and red for over the high.

The CAP-DTXS-40 is also supplied with ZT?Logger data acquisition software. It can download data from the tester memory or captures continuous data at 10 points/second. Zero the tester or capture data while at the computer. All tester programming can be set and saved from the software.
Includes a 3 Point Calibration Certificate traceable to NIST, AC adapter/charger and built-in Ni-MH rechargeable batteries, and 1 inch high standard pegs.Features: – Test cap loosening (CCW) and tightening (CW) torque- Selectable real time and peak modes- USB, RS-232, Digimatic and Analog outputs- Selectable units of lbf-in, kgf-cm, N-m, ozf-in, N-cm- 1000 data point memory capacity- Programmable high/low setpoints with color-coded LED indicators and audible signal- Overload and low battery indicators- 200% overload capacity- DTXS accommodates samples from 20 up to 160 mm (0.787″ – 6.30″)- Four rubber-coated 1 inch pegs are included with DTXS- Optional “Small Table” accommodates samples from 7 up to 50 mm (0.275″ – 2″)- Optional Peg sizes/material available- Include 3 Point Calibration Certificate traceable to NIST. ISO 17025 Calibration – Certification optionally available- 2 Year Warranty

Specifications

– Range: 40.00 (0.01 lbf-in)/50.00 (0.01 kgf-cm)/500.0 (0.1 N-cm)/5.000 (0.001 Nm)/640.0 (0.1 ozf-in)- Accuracy: +/- 0.5%F.S., +/- 1digit- Unit of measurement: lbf-in, kgf-cm, N-m, ozf-in, N-cm- Display: 4-digit- Display update: 10 times/ sec- Auto Zero Reset: 1.0 to 60 seconds (selectable)- Sampling rate: 2,000 samples/second (max) thru the USB port- Safe overload rating: Approx. 200%- Operating Environment: Temperature: 0-40 C Humidity: 20 -80%RH- Output: Outputs USB, RS-232C, Digimatic and 2 VDC analog output (D/A),Comparator 3 steps (-NG/OK/+NG), Overload alarm- Overload warning: Approx.110%F.S. (Warning message and alarm )- Sensitivity: Max, High, Medium, Low (selectable)- External connecting switch: SEND (a point of contact holding), Zero reset, Peak, ON/OFF setting- Auto Power Off: 5, 10, minutes or OFF (selectable)- Power: Built-In Rechargeable Ni-MH battery pack or via AC-Adapter (100-240V AC)- Battery Life: approx. 8 hours (recharge time approx. 10 hours)- Battery Indicator: Indicates three charge states high, medium and low- Plug Type: USA Blade Type (Select Euro Plug Adapter for use in 230V Countries)- Weight: Approx. 10 Lbs/4.5kg (Including Standard table and Standard pins)- Warranty: 2-Years

Warranty:

– 2 Years Manufacturer Warranty + Additional 1 Year Instrument Choice Warranty