Cap Torque Tester 0-100.00kgf-cm/1000Ncm Capacity – IC-CAP-DTXS-85

The CAP-DTXS-85 is an easy-to-use, high-precision cap torque tester that features a large electroluminescent display that clearly indicates the real-time and peak torque. Color-coded LED indicators alert the user to Go/NoGo conditions. Orange lights indicate a value less than low setpoint, green lights between high and low, and red for over the high.

The CAP-DTXS-85 is also supplied with ZT?Logger data acquisition software. It can download data from the tester memory or captures continuous data at 10 points/second. Zero the tester or capture data while at the computer. All tester programming can be set and saved from the software.
Includes a 3 Point Calibration Certificate traceable to NIST, AC adapter/charger and built-in Ni-MH rechargeable batteries, and 1 inch high standard pegs. Features:– Test cap loosening (CCW) and tightening (CW) torque – Selectable real time and peak modes – USB, RS-232, Digimatic and Analog outputs – Selectable units of lbf-in, kgf-cm, N-m, ozf-in, N-cm – 1000 data point memory capacity – Programmable high/low setpoints with color-coded LED indicators and audible signal – Overload and low battery indicators – 200% overload capacity – DTXS accommodates samples from 20 up to 160 mm (0.787″ – 6.30″) – Four rubber-coated 1 inch pegs are included with DTXS – Optional “Small Table” accommodates samples from 7 up to 50 mm (0.275″ – 2″) – Optional Peg sizes/material available – Include 3 Point Calibration Certificate traceable to NIST. ISO 17025 Calibration – Certification optionally available – 2 Year Warranty

Specifications

– Range: 85.0 (0.1 lbf-in)/ 100.0 (0.1 kgf-cm)/ 1000 (1 N-cm)/ 10.000 (0.01 Nm)/ 1360 (1 ozf-in) – Accuracy: +/- 0.5%F.S., +/- 1digit – Unit of measurement: lbf-in, kgf-cm, N-m, ozf-in, N-cm – Display: 4-digit – Display update: 10 times/ sec – Auto Zero Reset: 1.0 to 60 seconds (selectable) – Sampling rate: 2,000 samples/second (max) thru the USB port – Safe overload rating: Approx. 200% – Operating Environment: Temperature: 0-40 C Humidity: 20 -80%RH – Output: Outputs USB, RS-232C, Digimatic and 2 VDC analog output (D/A),Comparator 3 steps (-NG/OK/+NG), Overload alarm – Overload warning: Approx.110%F.S. (Warning message and alarm ) – Sensitivity: Max, High, Medium, Low (selectable) – External connecting switch: SEND (a point of contact holding), Zero reset, Peak, ON/OFF setting – Auto Power Off: 5, 10, minutes or OFF (selectable) – Power: Built-In Rechargeable Ni-MH battery pack or via AC-Adapter (100-240V AC) – Battery Life: approx. 8 hours (recharge time approx. 10 hours) – Battery Indicator: Indicates three charge states high, medium and low – Plug Type: USA Blade Type (Select Euro Plug Adapter for use in 230V Countries) – Weight: Approx. 10 Lbs/4.5kg (Including Standard table and Standard pins) – Warranty: 2-Years

Warranty:

– 2 Years Manufacturer Warranty + Additional 1 Year Instrument Choice Warranty