Amprobe ACD-10 PLUS 600A Clamp Multimeter

Features:

– Measures AC and DC voltage to 600V and AC current to 600A to handle residential/commercial and small industrial applications
– Thin jaws, only 10mm (0.4) thick make it easier to maneuver between tightly packed conductors
– Measures frequency, resistance, and capacitance
– Features continuity beeper to quickly find opens and shorts
– Accommodates conductors up to 1.0 (25mm) in diameter
– Auto ranging saves time by instantly selecting correct range
– Auto power off to conserve battery life
– Rubber over-molded case absorbs shock
– Includes test leads, battery (installed), soft carrying pouch, and users manual

Specifications

– AC Voltage: 4.000 V, 40.00 V, 400.0 V, 600 V
– DC Voltage: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 V
– AC Current: 40.00 A, 400.0 A, 600 A
– Resistance: 400.0 , 4.000 , 40.00 , 400.0 , 4.000 M, 40.00 M
– Capacitance: 500.0 nF, 5.000 F, 50.00 CF, 500.0 F, 3000 F
– Frequency: 40 Hz to 400 Hz with Jaw, 10 Hz to 100 kHz with test leads
– Display: 3-3/4 digits 4000 counts LCD display
– Update rate: 3 per second nominal
– Polarity: Automatic
– Operating temperature: 0 to 40 C; less than 80% RH for temperature up to 31 C decreasing linearly to 50% RH at 40 C
– Altitude: Operating below 2000m; Indoor use
– Storage temperature: -20 to 60 C, less than 80% RH (with battery removed)
– Temperature coefficient: nominal 0.15 x (specified accuracy)/C at(0 to 18 C or 28 to 40 C)
– Low battery: Below approx. 2.4V
– Power supply: 3V coin battery IEC-CR2032
– Power consumption: 2.8 mA typical except that 3.3 mA typical for ACA function
– APO timing: Idle for 30 minutes
– APO consumption: 5 uA typical
– Jaw opening conductor diameter: max 26 mm
– Special features: 30ms Max Hold; Data Hold; Relative Zero mode