Amprobe AC50A AC Leakage Clamp Meter

Features:

– AC current measurement to 60 A
– Leakage current measurement with resolution of 0.01 mA
– AC voltage to 400 V
– Resistance measurement and continuity beeper
– Min/max control to see largest or smallest values in a series of measurements
– Relative value measurement to determine differentials
– Data hold to freeze measurement value on the display
– Digital display with analog bar graph
– Jaw opening 1.2 inch.
– Auto-power off to save battery life
– Minimum resolution 0.01 mA

Specifications

– AC Voltage: 400.0 V
– AC Current: 40.00 mA, 400.0 mA, 4.000 A, 40.00 A, 60.0 A
– Resistance: 400 Ohms
– Accommodates conductors: up to 1.2 (30 mm) in diameter
– Display: 3-3/4, LCD incl. functions and symbols
– Bar graph: 40 segments
– Range selection: manual
– Auto-power off: approx. 30 min.
– Overload display: the left digit is blinking
– Measuring rate: 20 measurements/sec. (Bar graph), 2 measurements/sec. (LCD)
– Clamp opening: 1.2 inch (30 mm)
– Over voltage category: CAT II 600 V, CAT III 300 V
– Pollution degree: 2
– Height above MSL: up to 2000 m, indoor operation
– Battery display: at low battery
– Power supply: Battery 2 x 1,5 V IEC LR6 (alkaline)
– Current consumption: approx. 10 mA
– Operation temperature: -10 to 50 C (14 to 122 F)
– Storage temperature: -20 to 60 C (-4 to 140 F)
– Humidity: less than 75 % relative humidity