ADVANCED GEO EARTH GROUND TESTER, KIT – IC-FLUKE-1625-2 KIT

Features:

The Fluke 1625-2 earth ground tester is able to measure earth ground loop resistances using only clamps. With this test method, two clamps are placed around the earth ground rod and each are connected to the tester. No earth ground stakes are used at all. A known, fixed voltage is induced by one clamp and the current is measured using the second clamp. Then the tester automatically determines the resistance of the earth ground rod. This test method only works if a bonded earth ground system exists for the building or structure under test, but most are. If there is only one path to ground, like at many residential applications, the Stakeless method will not provide an acceptable value and the Fall of Potential test method must be used.

With Stakeless testing, the earth ground rod does not need to be disconnected – leaving the bonded earth ground system intact during test. Gone are the days of spending time placing and connecting stakes for each earth ground rod on your system – a major time saver. You can also perform earth ground tests in places youve not considered before: inside buildings, power pylons, or anywhere you dont have access to soil.

Automatic Frequency Control (AFC) – identifies existing interference and chooses a measurement frequency to minimize its effect, providing more accurate earth ground value
R* measurement calculates earth ground impedance at 55 Hz to more accurately reflect the earth ground resistance that a fault-to earth ground would see
Adjustable limits – for quicker testing
3- and 4-pole Fall-of-Potential, earth resistance loop testing
4-pole Soil Resistivity testing
Selective earth ground rod testing using 1 clamp
Stakeless earth ground rod testing using 2 clamps
IP56 rated for outdoor use
Rugged carrying case
USB data storage and transfer

Accessory kits:

Stake Set for 3-Pole Measurement
Stake Set for 4-Pole Measurement

Cables and hardware:

Ground/Earth Cable Reel 25 m (81.25 ft)
Ground/Earth Cable Reel 25 m (81.25 ft)
Ground/Earth Cable Reel 50 m (162.5 ft)

Current clamps

Clip-on Current Transformer (Inducing)
EI-162BN 320 mm Diameter Split Core Transformer
Clip-on Current Transformer (Sensing) with Shielded Cable Set
Selective/Stakeless Clamp Set

Other accessories

Ground/Earth Stake 2