10x dBadge2ISPRO kit – IC-dBadge2Pro/KIT10

The kit contains 10 dBadge2 Pro Noise Dosimeter, Calibrator, Dock, 2 3-way Charger, Peli Case and Insight Software.
dBadge Pro features:

Bluetooth 4.0 wireless connectivity
Audio Notes feature – The dBadge2 PLUS can record up to 15 seconds of voice notes at the start of the measurement.
Audio Recording – Automatic recording trigger and user settings.
Airwave App for mobile devices such as phones and tablets
Octave band filters – Octave Bands split the audible spectrum into bands to provide frequency analysis. Ideal for very high level sounds or tonal noise.
Multiple ‘simulated’ dosimeters
Full colour display
Motion sensor
1 second time history profiling
Pause function
Updated & Simplified Casella Insight Plug-in with advanced noise analysis features

dBadge Pro

Acoustic

Standards: ANSI S1.25:1991 R2007, IEC 61252 Ed 1.1 (2002-3)
Linear Operating Range: 55 to 140.3 dB(A) RMS
Dynamic Range: 96dB
Peak Measurement Range: 90 to 143.3 dB (C or Z weighted)
Sound Exposure Range: 0.0- 6,100.0 PaHours/ 0.00 22,000,000.00 PaSec/0.0-100,000.0% Dose
Frequency Weightings: A, C and Z
Time Weightings: Fast, Slow and Impulse
Exchange Rate: Q=3 or Q=5
Threshold: 70 to 90 dB in 1 dB steps (set using Insight software)
Criterion Level: 70 to 90 dB in 1 dB steps (set using Insight software)
Stabilization Time: <3 seconds after power up Audio recording

Trigger events/sources: LAF, LAS, LCpk, LZpk
Audio recording storage (Notes): 15 seconds for each measurement run
Audio recording storage (Events): 10 seconds with 3 second pre-trigger
Sampling Rate: 8kHz, 16bit

Octave band filters

Each parameter stored every second: TWA (8hr), Projected TWA (8hr), LAeq, LCeq, LCpk, LZpk, LAFmax, LASmax, Motion Index (0 or 1)
Bands: 31.5Hz to 8kHz/A or Z weighted Leq and LMax (Fast or Slow)

Memory

Maximum Run Duration: 24 hours
Maximum number of Runs: 100
Storage Capacity: Internal USD Flash memory – 300 hours of run data (including 1 second profile data)

Technical

Battery: Internal NiMH, 800mAH (last up to 35 hours)
PC Interface: USB 2.0 Full speed 12Mbps via Docking Station
Bluetooth Connectivity: Bluetooth 4.0 (Low Energy or Smart)a
TX Power: 0 dBm to -23 dBm
Receiver sensitivity: -93 dBm
Range: Typically 25m line-of-sight
Display: 96 x 64 dots, full color OLED with adjustable contrast
User Controls: Two buttons. Remote control via Airwave application