10x dBadge2IS kit – IC-dBadge2/KIT10

The kit contains 10 dBadge2 Noise Dosimeters, Calibrator, Dock, two 3-way Chargers, Peli Case and Insight Software.

dBadge2 features:

Bluetooth 4.0 wireless connectivity
Airwave App for mobile devices such as phones and tablets
Multiple ‘simulated’ dosimeters
Full colour display
Motion sensor
1 second time history profiling
Pause function
Recording of audio events (optional)
Octave band frequency analysis (optional)
Updated & Simplified Casella Insight Plug-in with advanced noise analysis features

dBadge2

Acoustic

Standards: ANSI S1.25:1991 R2007, IEC 61252 Ed 1.1 (2002-3)
Linear Operating Range: 55 to 140.3 dB(A) RMS
Dynamic Range: 96dB
Peak Measurement Range: 90 to 143.3 dB (C or Z weighted)
Sound Exposure Range: 0.0- 6,100.0 PaHours/ 0.00 22,000,000.00 PaSec/0.0-100,000.0% Dose
Frequency Weightings: A, C and Z
Time Weightings: Fast, Slow and Impulse
Exchange Rate: Q=3 or Q=5
Threshold: 70 to 90 dB in 1 dB steps (set using Insight software)
Criterion Level: 70 to 90 dB in 1 dB steps (set using Insight software)
Stabilization Time: <3 seconds after power up Memory

Maximum Run Duration: 24 hours
Maximum number of Runs: 100
Storage Capacity: Internal USD Flash memory – 300 hours of run data (including 1 second profile data)

Technical

Battery: Internal NiMH, 800mAH (last up to 35 hours)
PC Interface: USB 2.0 Full speed 12Mbps via Docking Station
Bluetooth Connectivity: Bluetooth 4.0 (Low Energy or Smart)a
TX Power: 0 dBm to -23 dBm
Receiver sensitivity: -93 dBm
Range: Typically 25m line-of-sight
Display: 96 x 64 dots, full color OLED with adjustable contrast
User Controls: Two buttons. Remote control via Airwave application