Respicon 2 TM – IC-Respicon 2 TM

The Respicon 2 TM contains three internal stages, separated by virtual impactors. Each of the three stages carries a filter on which the respective dust fraction is collected. After gravimetric determination of the collected dust masses, the included evaluation software calculates the concentrations of the inhalable, thoracic and respirable dust fractions. In addition, the included scattered-light photometers provide time-resolved concentration measurements.

The Respicon 2 TM can be paired with the Hund DALO data logger for a more convenient operation via touchscreen. The DALA data logger also comes pre-installed with a data software that can analyze the data gathered from the Respicon TM for easier analysis of the samples gathered and the measured flow rate.
Requires Glass fibre filters and filter cartridge for use. Each sold separately.

Features:

Simultaneous online measurement of all 3 relevant dust fractions: Inhalable dust, Thoracic dust, and Respirable dust.
Simple calibration of the results
Comfortable operation via touchscreen with the use of the DALO data logger (optional)
Straightforward evaluation with PC software

Respicon TM Specifications:

Collected dust fractions: Inhalable (< 100 m), Thoracic (< 10 m) and Respirable: (< 4 m).
Segregation principle: Two-stage virtual impaction
Measurement range range [mg/m] (DEHS particles, d = 1 m): 0-10
Sensitivity [mV/mg/m]: 300
Detection limit [g/m] (DEHS particles, d = 1 m): approx. 30
Filter modules: Filter cassettes for glass-fiber or membrane filters (37 mm diameter).
Mounting thread: Whitworth thread W 1/4 in bottom stage
Standards: EN481, ISO7708, ACGIH, AIHA, MAK, TRGS, test report acc. to prEN 13205 for Respicon TM
Volume flow [l/min]: 6.22
Pressure drop: 4 kPa
Operation time [h] (as specified by manufacturer): > ca.24

Datalogger Specifications:

Channels: 4, 1 available for additional sensors
Interfaces: USB, Bluetooth
Measurement interval [s]: 1 3.600, adjustable in 1-s steps
Storage capacity: approx. 6 full days of measurement (@ 1 s measurement interval), max. 9 full measurement days (longer measurement intervals)
Operation modes: Respicon TM/data logger
Battery mode: Li-ion battery, charging time approx. 6 h
Power supply: USB power supply and charger
Operation time [h] approx. 8
Display: 3.2 touchscreen, resistive
Accessories: evaluation software, DALO carrying case, transport case